- 绝缘电压击穿强度试验仪
- 绝缘电压击穿强度试验仪
绝缘电压击穿强度试验仪使用和保养
绝缘电压击穿强度试验仪比较精密的阻抗测量仪器，在合理使用和注意保养情况下，才能保证长期稳定和较高的测试精度。
a．熟悉本说明书，正确地使用仪器；
b．使仪器经常保持清洁、干燥；
c．本仪器保用期为18个月，如发现机械故障或失去准确度，可以原封送回本厂，免费修理。
注意事项：
●本仪器试验过程中如空气相对湿度大于70%，两电极间空气放电的距离会增加很多所以试验中请与仪器保持1.2米的距离。
●本仪器之控制计算机专为电压击穿试验机设计，请勿随意添加和删除程序或移作它用。
●本公司保留对设备改进的权利，并不另行通知用户。
技术指标：
01、输入电压： 交流 220 V
02、输出电压： 交流 0--100 KV ;
直流 0—100 KV
03、电器容量： 10KVA
04、高压分级： 0-100KV
05、升压速率：0.01-5.0kv
（备注：满足标准要求并可以根据用户需求设定不同的升压速率）
06、试验方式：
直流试验：1、匀速升压 2、梯度升压 3、耐压试验
交流试验：1、匀速升压 2、梯度升压 3、耐压试验
07、试验介质：空气，试验油
08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。
09、仪器配备*故障报警系统 避免用户操作故障仪器发生危险。（上位机报警和下位机报警）
主机尺寸：长宽高-800*700*1600（MM）
操作台尺寸：长宽高-800*700*650（MM）
防护罩材质：白色透明有机玻璃
油槽尺寸：长宽高-300*200*150
设备重量：约100KG
产品特点
1、运行于WIN XP/WIN7/WIN8系统下的独立安装软件，界面友好，操作简单
2、实验显示曲线，数据自动储存，自动查找
3、多种用途可以进行交、直流试验试验准确、可靠、安全
4、计算机控制试验过程，自动判断停止，自动复位
5、超压、过流、短路、漏电、误操作等多种保护
、
电压击穿试验仪满足标准：
GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 /GB12656 /ASTM D149 .
GB1408-2006 绝缘材料电气强度试验
GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
GB/T3333 电缆纸工频电压击穿试验
HG/T 3330绝缘漆漆膜击穿强度测定
GB12656 电容器纸工频电压击穿试验
ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度试验
Insulation voltage breakdown strength tester use and maintenance
Insulation voltage breakdown strength tester is the impedance of the precision measuring instruments, under the condition of reasonable use and pay attention to maintenance, to ensure the long-term stability and high precision.
A. Be familiar with this manual, the proper use of the instrument;
B. make often maintain clean, dry instrument;
C. the instrument warranty period for 18 months, such as mechanical failure or loss of accuracy, can be intact back to our factory, repair free of charge.
Insulation voltage breakdown strength tester to note:
When the instrument test such as air relative humidity is more than 70%, in the process of air discharge distance between two electrodes increases a lot so experiment instrument to keep a distance of 1.2 meters.
When the instrument is specially designed for the control of computer breakdown voltage tester design, please do not add and remove programs or for it.
The company reserves the right to equipment improvement, did not notice the user.
Insulation voltage breakdown strength tester technical indicators:
01, input voltage: ac 220 V
02, output voltage: communication 0-100 KV;
Dc 0-100 KV
03, electric capacity: 10 kva
04, high-pressure sizing: 0-100 kv
05, pressure rise rate: 0.01 to 5.0 kv
(note: meet the standard requirements and can be set according to user requirements of different rate of pressure rise)
06, test mode:
Dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test
Communication test: 1, 2, gradient booster 3 uniform booster, withstand voltage test
07, test medium: air, oil test
08, installation, high sensitivity of over current protection device to ensure the sample breakdown within 0.05 S when cut off power supply.
09, instrument equipped with advanced fault alarm system Avoid user operation fault instrument. Alarm (the upper machine and lower machine alarm)
Host size: dimensions - 800 * 700 * 700 (MM)
Work station size: dimensions - 800 * 700 * 700 (MM)
Shield material: white transparent organic glass
Tank size: dimensions - 300 * 200 * 150
Weight: about 100 kg
Product features
1, run on Windows XP/Windows 7 / doing under the system of independent software installation, friendly interface, easy to operate
2, experiments show that curve, data storage automatically, automatic search
3, a variety of utility can be ac and dc test experiment was carried out accurate, reliable and safe
4, the computer control test process, automatic stop, automatic reset
5, overpressure, over current, short circuit, leakage, wrong operation and so on the many kinds of protection
,
Breakdown voltage tester meet standard:
GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 / GB12656 / ASTM D149.
Insulation dielectric strength test GB1408-2006
GB/T1695-2005 rubber breakdown strength and power frequency voltage withstand voltage strength test
GB/T3333 cable ZhiGong frequency voltage breakdown test
HG/T 3330 insulating varnish film breakdown strength measurement
GB12656 ZhiGong frequency capacitor voltage breakdown test
ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test